Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Dipped Beam Bulbs in the Hyundai i10?

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
This video is currently unavailable

As shown in this tutorial, replacing the dipped beam bulbs in the Hyundai i10 is an extremely simple and quick task. Before proceeding, ensure the key is not inserted for safety.

Start by opening the bonnet, then remove the upper rivets and take off the plastic cover. Next, undo all the fixing bolts of the headlamp, separate it from the bodywork, and open the large rear cap. At this point, disconnect the connector, extract the faulty bulb by releasing the clip, and insert the replacement.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

What Dipped Beam Bulbs Fit the Hyundai I10
What Dipped Beam Bulbs Fit the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) This brief video guide shows the dipped beam bulbs required for a first-generation Hyundai I10, produced from 2007 to 2013. The necessary dipped beam…
How to Replace the Rear Light Bulb on a Hyundai I10
How to Replace the Rear Light Bulb on a Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) Replacing the right rear light bulb on the Hyundai I10 involves very simple steps. The first step is to open the boot. The second step is to remove t…
How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) Replacing the left fog light bulb on a Hyundai I10 involves a few simple steps that you can carry out independently. To replace the bulb, you need to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos