Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Hyundai I10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the right rear light bulb on the Hyundai I10 involves very simple steps. The first step is to open the boot.

The second step is to remove the two screws securing the light using a 20 mm Torx key. The third step is to remove the light from its housing and disconnect the connector to take out the bulb. The fourth step is to insert a new bulb and connect it to the connector.

The fifth and final step is to refit the light into its housing and secure it with the two screws.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Hyundai I10
How to replace the rear headlight bulb of the Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) If one of the bulbs in the rear headlight of your Hyundai i10 has suddenly stopped working and you want to find out how to replace it correctly and s…
How to Replace the Front Headlight Bulb on Hyundai I10
How to Replace the Front Headlight Bulb on Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) To replace the front headlight bulb on the Hyundai I10, open the bonnet to access the engine compartment and rotate the protective cap at the rear of…
How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos