Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Hyundai I10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Tail light bulb

If one of the bulbs in the rear headlight of your Hyundai i10 has suddenly stopped working and you want to find out how to replace it correctly and safely, then all you have to do is read the following guide and follow the steps described. First of all, reach the back of the car and lift the hood. At this point, use a crosshead screwdriver to unscrew all the screws that hold the headlight securely in place. Finally, pull the headlight towards you without damaging it and proceed with the replacement of the faulty bulb with a new one.

Posted on 8 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Hyundai I10
How to replace the rear headlight bulb of the Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) The replacement of the right rear headlight bulb of the Hyundai i10 follows very simple steps. The first step to be performed is to open the trunk. T…
How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …
How to Replace the Front Headlight Bulb on Hyundai I10
How to Replace the Front Headlight Bulb on Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) To replace the front headlight bulb on the Hyundai I10, open the bonnet to access the engine compartment and rotate the protective cap at the rear of…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos