Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Gearbox oil replacement instructions

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Gear oil
Operation: Gearbox oil replacement instructions

The replacement of the gearbox oil is a maintenance that is often neglected and that many times is not even foreseen in the maintenance plan of the manufacturer; it is clear that turning the gears in a new oil is certainly clean is certainly optimal, therefore it is advisable to change the oil every 60,000 km, especially in consideration of the fact that generally no more than 2 kg are needed; it is advisable to carry out this maintenance with the engine cold since the drain plug is located immediately above the muffler; then lift the car on suitable stands and remove the splash guard; then unscrew both the filler and drain plugs to facilitate drainage, clean the drain plug and screw it back on to then insert the new oil: the level is reached when oil starts to come out.


Posted on 3 September 2023 by ScegliAuto



Gearbox oil replacement instructions
Hyundai Santa Fe (2006-2012 / MK 2) In the case of an automatic transmission, the quality of the oil inside is absolutely fundamental as many factors depend on it, such as the wear of t
How do you replace the transmission oil of the Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) The replacement of the gearbox oil on the Hyundai Santa Fe is done by accessing the components located in the lower part of the engine compartment: h
Starter motor replacement instructions
Hyundai Santa Fe (2000-2006 / MK 1) If it happens that the motor does not start even when the ignition key is turned, then it is likely that it may have been damaged; in any case, befor

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos