Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How do you replace the transmission oil of the Hyundai Santa Fe?

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Gear oil
Operation: How do you replace the transmission oil of the Hyundai Santa Fe?

The replacement of the gearbox oil on the Hyundai Santa Fe is done by accessing the components located in the lower part of the engine compartment: here you will find a protective panel, which must be removed by unscrewing the corresponding fastening screws. Once the panel has been removed, it will be possible to unscrew the drain plug of the oil tank, allowing it to drain out and collecting it in a suitable container. After all the oil has drained out, the plug can be closed and the panel reinstalled, opening the hood and topping up the oil through the vent next to the battery.


Posted on 28 August 2023 by ScegliAuto



How do you replace the transmission oil in the Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In order to replace the transmission oil of the Hyundai Santa Fe, you need to lift the car so that you can access the bottom part of the engine compa
How to reset the oil light on the Hyundai Santa Fe.
Hyundai Santa Fe (2012-2018 / MK 3) Resetting the oil service light on a 2018 Hyundai Santa Fe, after replacing the filter and changing or topping up the oil, is a very simple operation
How to change engine oil on Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) How to change engine oil on Hyundai Santa Fe? Simple operation by following the right steps, let's see how to proceed: we lift the car on a column or

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos