Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox oil in a Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Transmission fluid

To replace the gearbox oil in a Hyundai Santa Fe, you need to lift the vehicle to access the underside of the engine compartment: here you will find a protective panel that must be removed by loosening its fixing screws. Once the panel is removed, you can access the drain plug of the oil reservoir, which must be unscrewed to collect the used oil in a container. Once finished, close the drain plug and top up through the breather inside the engine compartment, under the fuse box.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gearbox Oil in a Hyundai Santa Fe?
How to Replace the Gearbox Oil in a Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) To replace the gearbox oil in a Hyundai Santa Fe, access the components located at the bottom of the engine bay. Here, you will find a protective pan…
How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
Hyundai Santa Fe (2006-2012 / MK 2) Today's instructions will allow us to carry out the routine maintenance check, replacing the engine oil and oil filter of the Hyundai Santa Fe 3.5 V6…
How to Reset the Oil Service Light on a Hyundai Santa Fe?
How to Reset the Oil Service Light on a Hyundai Santa Fe?
Hyundai Santa Fe (2019-2023 / MK 4, TM) In this tutorial, you will learn how to reset the oil service light on a Hyundai Santa Fe, a very simple and quick operation. Before proceeding, ensu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos