Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : How to replace the battery of the key for the Hyundai Tucson 2020.

Hyundai Tucson - Video tutorial

Model: Hyundai Tucson MK 3, TL - Years 2015-2021
Part: Key
Operation: How to replace the battery of the key for the Hyundai Tucson 2020.

If you own a third-generation Hyundai Tucson (2020) and the remote control has suddenly stopped working, then all you have to do is follow these steps to correctly replace the battery inside it. First of all, you need to remove the emergency physical key located in the cover so that you can easily disassemble it with the help of a flat-head screwdriver. After that, remove the motherboard and locate the exhausted battery. At this point, also remove the exhausted battery and replace it with a new button battery (CR 2032 model).


Posted on 8 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Tucson 2022-2027 - Problem with the remote control not working on the Hyundai Tucson? Read Answer
    • Tucson 2015-2021 - Why is the remote control of the Hyundai Tucson no longer recognized? Read Answer
    • Tucson 2015-2021 - Why does a Hyundai Tucson not recognize the electronic key? Read Answer
    • Tucson 2004-2009 - Where is the Hyundai Tucson remote control receiver located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos