Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Put the Windscreen Wipers of a Hyundai i30 into Maintenance Mode

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

Putting the service mode of the windscreen wipers on a 2017 Hyundai i30 is a very simple operation that you can perform independently, aided by this short video tutorial. First, turn on the vehicle's ignition without starting the engine for a few seconds, then turn it off. Turn it back on and then move the wiper arm to a vertical position for a few seconds using the lever located near the steering wheel.

By positioning the arm vertically, you can easily change the wiper blades.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to change the windshield wipers of the Hyundai I30
How to change the windshield wipers of the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) On the Hyundai i30, replacing the wiper blades is a simple operation, but it's advisable to do it with a bit of caution to avoid the metal arm snappi…
Where to Find the OBD Port of the Hyundai i30
Where to Find the OBD Port of the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) If you own a 2021 Hyundai i30 and want to find the OBD port to connect a professional diagnostic tool, read the following instructions carefully and …
How to reset the Service light on the Hyundai i30?
How to reset the Service light on the Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) To reset the Service light on the Hyundai i30, insert the key and turn it to switch on the instrument cluster. You can then navigate through the menu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos