Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Hyundai Atos 1.0

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Engine oil

Today, we will discover the procedure for replacing the engine oil and oil filter of the Hyundai Atos 1.0, following the instructions below. First, lift the vehicle and start by unscrewing the oil drain bolt located on the sump, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one, also changing the seal, as shown in the video. At this point, unscrew the filler cap to pour in the correct amount of engine oil, the specifications of which are indicated in the vehicle's manual!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Hyundai Atos. First, lift the vehicle and remove the drain b…
How to Change the Engine Oil of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before you begin, remove the oil dipstick, then put the car in first gear and engage the handbrake on your Hyundai Atos. Finally, lift the vehicle. S…
When to Replace the Timing Belt on a Hyundai Atos
When to Replace the Timing Belt on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this guide, you will find the main information useful for the removal and replacement of the timing belt on the Hyundai Atos; the manufacturer sta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos