Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Remote Key for a Hyundai i20

Model: Hyundai I20 PB, MK 1 - Years 2008-2014
Part: Key

It often happens that the buttons on the remote key start to fail, and rather than promptly repairing them, you begin to press harder until you puncture the rubber cover that acts as the button; you can replace the buttons without opening the key shells: start by removing the rubber cover with the buttons (you will need a new one, easily available online), the chrome frame, and the underlying support; at this point, cut out the portion of plastic covering the button to access the circuit and replace the button itself with a new one; reverse the steps to reassemble the key, applying the new rubber cover and securing everything with a few drops of quick-setting glue.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Key Fob Shell on the Hyundai I20
How to Remove and Replace the Key Fob Shell on the Hyundai I20
Hyundai I20 (2008-2014 / PB, MK 1) In this short and simple video, you will understand the main steps needed to remove and replace the key fob shell on the Hyundai I20. First, take you…
How to Dismantle the Remote Key to Replace the Battery on the Hyundai I20
How to Dismantle the Remote Key to Replace the Battery on the Hyundai I20
Hyundai I20 (2008-2014 / PB, MK 1) Today, you will learn how to dismantle and replace the battery in the remote key for the Hyundai I20 second generation, following the instructions be…
How to Replace the Battery in the Hyundai I20 Remote
How to Replace the Battery in the Hyundai I20 Remote
Hyundai I20 (2014-2020 / MK 2, GB) In today's tutorial, we will see how to replace the battery in the remote for the Hyundai I20. First, take your key and press the button to release t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos