Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Infiniti G.

Model: Infiniti G V35 - Years: 2003, 2004, 2005, 2006, 2007
Part: Rear bumper

See other generations:
Video tutorial

Let's see below how to disassemble and replace the rear bumper of the Infiniti G. First, we open the rear trunk lid and begin to remove the upper plastic cover by unscrewing all the fastening screws found on the upper and lower parts of the bumper; then we also remove the taillights by unscrewing the screws and disconnecting the electrical connectors of the bulbs, as shown in the video.

At this point, we unscrew the screws located on both sides of the wheel arches, gently releasing the bumper from the sides until we completely remove it; now we install the new bumper!


Posted on 30 November 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Infiniti G
How to Reset the Service Light on the Infiniti G
Infiniti G (2007-2015 / V36) By following these brief and simple instructions, you will see how to reset the service light for the regular maintenance of the engine oil change on…
How to replace the key battery of the Infiniti G35
How to replace the key battery of the Infiniti G35
Infiniti G (2003-2007 / V35) Replacing the battery inside your Infiniti G35 key (2003-2007) follows a procedure similar to many other models from various manufacturers. Here are …
Replacing Rear Brake Pads
Replacing Rear Brake Pads
Infiniti G (2002-2007 / ) This video shows how to replace the rear brake pads. First, lift the vehicle, unscrew the wheel nuts, and remove the wheel. You will see the brake ca…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos