Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. G
    4. : Replacement of rear brake pads

Infiniti G - Video tutorial

Model: Infiniti G - Years 2002-2007
Part: Brake pads
Operation: Replacement of rear brake pads

This video shows us how to replace the rear brake pads. First we lift the vehicle, unscrew the rim nuts and remove the wheel. We will find our brake caliper in front of us, identify the two nuts placed on the rear side and unscrew them to remove the caliper. Once removed we go to remove the old brake pads and with a special tool we apply pressure to re-enter the caliper pistons. We then install the new brake pads and reassemble our brake caliper. Once the job is finished, before leaving, let's remember to pump the brake pedal a few times.


Posted on 26 July 2023 by ScegliAuto



Replacement front brake discs
Infiniti G (2007-2015 / V36) This video shows us how to replace our front brake discs. Every two brake pad changes it is also advisable to change the worn and worn brake disc its
Replacement pads and rear brake discs
Infiniti G (2007-2015 / V36) To replace the brake pads, first unscrew the brake fluid reservoir cap. Then with a screwdriver rotate the pins into position to pull out the catches
Disassembly grinding brake discs
Infiniti G (2002-2007 / ) When the brake discs start to wear. The contact surface with the tablets tends to become irregular and a sort of tooth forms along the edge; if the w

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos