Do it yourself
Frequently asked questions about cars and motorcycles

Alternator Repair with Pulley Replacement

Model: Infiniti M Y50 - Years 2005-2010
Part: Alternator

Disconnect the negative terminal of the battery and remove the cable. Lift the vehicle on a ramp, open the bonnet, and unscrew the retaining screws of the bumper. Remove the upper engine cover. Loosen the alternator tensioner bolt and remove the belt. Loosen the second tensioner and remove the auxiliary belt. Remove the plastic cover on the alternator pulley and take off the pulley using a impact wrench. Fit the new pulley using the specific tool. Refit the plastic cover, adjust the tensioner, and install the new belt. Check that the belt is correctly fitted by running the engine for two revolutions. Adjust the second tensioner and fit the new belt. Set the correct tension.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Infiniti M (2005-2010 / Y50) In this quick guide for Infiniti M35 owners, you will find how to locate the cabin fuse box in seconds. First, open the driver's side door, then turn…
Infiniti M (2005-2010 / Y50) Over time, the headlight can deteriorate due to vibrations or impacts. To access the headlight housing, you need to remove some components from the e…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos