Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil

Model: Infiniti G V36 - Years 2007-2015
Part: Transmission fluid

First, gather the necessary tools for the job, which include a jack to lift the car, the required oil for replacement, a pump, and a 10 mm hex key. There are two threaded plugs on the gearbox for the oil change. Loosen the side plug a few turns, then unscrew the lower one and allow the oil to drain. Check the condition of the threads on the plugs and close the lower one. Using the pump, refill with the correct amount of new oil. To check the level approximately, touch the oil inside the gearbox with your finger. Finally, screw the side plug back in.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Infiniti G
How to reset the service light on the Infiniti G
Infiniti G (2007-2015 / V36) Following these brief and simple instructions, we will see how to reset the maintenance service light for the regular oil change of the Infiniti G. F…
How to Change the Battery on an Infiniti G
How to Change the Battery on an Infiniti G
Infiniti G (2007-2015 / V36) To replace the battery on this car model, the information provided below contains all the necessary details for a correct replacement. Open the engin…
Replacement of Front Brake Discs
Replacement of Front Brake Discs
Infiniti G (2007-2015 / V36) This video shows you how to replace your front brake discs. It is advisable to change the brake disc every two brake pad replacements, as it becomes …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos