Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on an Infiniti QX 56

Model: Infiniti Infiniti Various
Part: Cabin air filter

In this video tutorial, you will see how to replace the cabin filter on an Infiniti QX 56 by following these simple steps: First, purchase a new pollen filter; next, get inside the vehicle, switch off the engine, and pull the handbrake. The cabin filter is located behind the glove compartment; use a flathead screwdriver to pry down the lower part under the glove compartment to detach it from its supports; now unscrew the three screws you see; next, open the glove compartment and locate the other three screws that need to be unscrewed. Now locate a piece under the central screw (see video) and push the tabs to one side to release it. Now close the glove compartment and remove it by pulling it from the clips it is attached to. Open the filter cover and remove the old filter element from its housing. Position the new filter according to the arrows.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on an Infiniti I35
How to Replace the Cabin Filter on an Infiniti I35
Infiniti Infiniti Various In this video tutorial, you can see how to replace the cabin filter on an Infiniti I35 by following some simple steps: it is recommended to replace t…
Where is the fan fuse located on the Infiniti M45?
Where is the fan fuse located on the Infiniti M45?
Infiniti Infiniti Various If the cabin fan of the Infiniti M45 is not functioning properly, the cause may be a faulty fuse. This fuse is located within the designated fuse box…
Where is the fuse box located in the Infiniti I30
Where is the fuse box located in the Infiniti I30
Infiniti Infiniti Various To easily locate the fuse box inside the cabin of your Infiniti I30 (1995-1999), follow the instructions in this guide. First, enter the vehicle and …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos