Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads and Rotor on the Infiniti JX 35

Model: Infiniti JX 35 L50 - Years: 2012, 2013
Part: Brake rotors

Video tutorial

Today, we will see in this video tutorial how to remove and replace the brake rotor and front brake pads on the Infiniti JX 35. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the brake caliper, which are located on the back of the caliper, removing it from the rotor.

Next, remove the caliper bracket and unscrew the rotor bolts, removing the rotor as well; install the new brake rotor and remove the old pads, then install the new high-quality pads.

Finally, reassemble the braking system!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Discs and Pads of the Infiniti JX 35
Replacing the Rear Brake Discs and Pads of the Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) Today, this guide will show you the steps to remove and replace the rear brake pads and discs of the Infiniti JX 35. First, lift the vehicle and star…
How to Replace the Front Brake Pads on an Infiniti JX 35
How to Replace the Front Brake Pads on an Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) To replace the front brake pads on an Infiniti JX 35, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, lo…
How to Replace the Rear Brake Pads on the Infiniti JX 35
How to Replace the Rear Brake Pads on the Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) Follow this guide to remove and replace the rear brake pads on the Infiniti JX 35 with these simple steps. First, lift the vehicle and remove the rea…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos