Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Infiniti JX 35

Model: Infiniti JX 35 L50 - Years 2012-2013
Part: Brake pads

Follow this guide to remove and replace the rear brake pads on the Infiniti JX 35 with these simple steps. First, lift the vehicle and remove the rear wheel. Next, unscrew the bolts securing the brake caliper located at the back using a socket wrench. At this point, remove the caliper from the brake rotor and then take out the old brake pads. Now, press the caliper piston to retract it and clean the caliper of any dirt. Finally, install the new brake pads!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Discs and Pads of the Infiniti JX 35
Replacing the Rear Brake Discs and Pads of the Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) Today, this guide will show you the steps to remove and replace the rear brake pads and discs of the Infiniti JX 35. First, lift the vehicle and star…
Replacing the Front Brake Pads and Rotor on the Infiniti JX 35
Replacing the Front Brake Pads and Rotor on the Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) Today, we will see in this video tutorial how to remove and replace the brake rotor and front brake pads on the Infiniti JX 35. First, lift the vehic…
How to Replace the Front Brake Pads on an Infiniti JX 35
How to Replace the Front Brake Pads on an Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) To replace the front brake pads on an Infiniti JX 35, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, lo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos