Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on an Infiniti JX35

Model: Infiniti JX 35 L50 - Years: 2012, 2013
Part: Headlight bulb

Video tutorial

This video describes how to replace the headlight bulb on the vehicle with an equivalent LED model. First, open the hood, locate the headlight assembly where the bulb needs to be replaced, and remove the screws on top of the assembly.

Lift the plastic seal of the hood. Then, reach behind the headlight and unscrew the plastic rear cap. Inside the headlight, disconnect the electrical connector, and below it is the bulb to be replaced, secured with a metal clip.

Release the retaining clip and remove the bulb. Take the new bulb and place it in the housing, then reassemble everything.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Infiniti JX35?
How to Replace the Cabin Filter in the Infiniti JX35?
Infiniti JX 35 (2012-2013 / L50) In this tutorial, you will see how to replace the cabin filter in the Infiniti JX35, a very simple and quick operation. First, go to the passenger si…
How to Replace the Cabin Air Filter in an Infiniti JX35?
How to Replace the Cabin Air Filter in an Infiniti JX35?
Infiniti JX 35 (2012-2013 / L50) Replacing the cabin air filter in an Infiniti JX35 is a very simple and quick operation. Start by sitting in the passenger seat, then remove the pane…
How to Replace the Headlight Bulb on an Infiniti JX 35
How to Replace the Headlight Bulb on an Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) To replace the headlight bulb on an Infiniti JX 35, open the hood to access the components inside the engine compartment. Once you have access to the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos