Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter on the Infiniti J35

Model: Infiniti JX 35 L50 - Years: 2012, 2013
Part: Cabin air filter

Video tutorial

To change the cabin air filter on the Infiniti JX35, you need to access the compartment located at the bottom of the passenger side. Remove the plastic part on the left side of the passenger's feet, and from there you will see the filter compartment, which you can only access by removing the glove box. Proceed as follows: Remove the outer panel of the dashboard and unscrew the three screws visible once the glove box is open.

Remove the bulb that lights up the glove box and take it out completely. At this point, it will come out entirely.

Even though everything is open, the filter will still come out with some difficulty. Use compressed air to clean the compartment and try to insert the new filter, making sure the arrows point downwards.

Now you can put the glove box back in place, starting with the bulb, closing the three screws, and repositioning the outer panel. Also, replace the cover on the passenger's footwell, and the job is complete.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Where are the fuses in the Infiniti JX 35?
Infiniti JX 35 (2012-2013 / L50) The Infiniti JX 35 has 71 fuse slots, not all occupied, located in three different boxes. The first is inside the cabin and contains fuses numbered 1…
How to Replace the Air Filter on the Infiniti JX35
How to Replace the Air Filter on the Infiniti JX35
Infiniti JX 35 (2012-2013 / L50) Replacing the air filter is a maintenance task that anyone can easily perform independently. With the following mini guide, you will not encounter an…
How to Reset the Service Light on an Infiniti JX 35
How to Reset the Service Light on an Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) The procedure to reset the service light on an Infiniti JX 35 involves simple and quick steps. First, get inside the vehicle and turn on the instrume…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos