Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu D Max
    4. : How to reset the oil light of the 2023 Isuzu D-Max?

Isuzu Isuzu D Max - Video tutorial

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2023
Part: Checks and maintenance
Operation: How to reset the oil light of the 2023 Isuzu D-Max?

Resetting the oil light on a 2023 Isuzu D Max vehicle is a very simple operation. The first step is to turn on the vehicle's instrument panel and pull the handbrake lever. The second step is to press the accelerator pedal for 20 seconds. The third step is to wait for the oil light to start flashing and press the accelerator pedal for another 40 seconds. As soon as the light stops flashing, release the pedal and turn off the instrument panel. Perform this operation only if you have previously performed an oil change as required.


Posted on 26 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Isuzu D Max 2011-2023 - What problems are there with the Isuzu D-Max? Read Answer
    • Isuzu D Max 2011-2023 - What does the diesel filter indicator light on the Isuzu D-Max indicate? Read Answer
    • Isuzu D Max 2011-2023 - How to know the meaning of the warning lights on an Isuzu D Max? Read Answer
    • Isuzu D Max 2011-2023 - How to fix the Isuzu D Max 4WD warning light on? Read Answer
    • Isuzu D Max 2011-2023 - Why doesn't the 4x4 drive fit on the Isuzu D-Max? Read Answer
    • Isuzu D Max 2011-2023 - What caused the Isuzu D Max all-wheel drive to malfunction? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos