Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to start an Iveco Daily?

Model: IVECO Daily MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

To start an Iveco Daily, follow these steps. Make sure the vehicle is in a parked position and that the handbrake is engaged.

Insert the key into the ignition and turn it to the "ACC" position to turn on the electrical devices such as the radio and air conditioning. Check that all warning lights on the dashboard turn on and off correctly.

Next, turn the key to the "ON" position to start the ignition system. Wait a moment while the fuel injection system prepares the engine for starting.

Once the engine is ready, turn the key to the "START" position and hold it in this position until the engine starts completely. Release the key once the engine is started and let the vehicle stabilize.

Check that all warning lights on the dashboard turn off and check the fuel level and other important indicators. Now you are ready to drive your Iveco Daily.


Posted on 13 December 2024 by ScegliAuto


Related tutorials

Reset Service Light on Iveco Daily
Reset Service Light on Iveco Daily
IVECO Daily (2014-2026 / MK 5) In this video, follow the instructions to reset the service light for the regular maintenance oil change on a 2014 Iveco Daily. First, get inside the…
Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
Where to Find the Fuse Box on the 2009 Iveco Daily
IVECO Daily If you own a 2009 Iveco Daily and want to find the box containing all the various fuses, simply follow the steps described in this guide. First, turn…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos