Do it yourself
Frequently asked questions about cars and motorcycles

Reset of the service warning light on Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Service warning light

Get into the driver's seat and turn on the instrument panel (the engine can be left off). Press the accelerator pedal as far as it will go and, in the meantime, press and release the brake pedal ten times (again as far as it will go). Once this is done, release the acceleration pedal, turn off the ignition and turn it on again to verify the success of the operation. Always remember not to use this procedure in place of the coupon but only after having performed the same (whether you or your mechanic do it), in order to avoid damage to the engine or to the vehicle in general.

Posted on 27 May 2021 by ScegliAuto

Video tutorial

Related tutorials

IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we…
IVECO Daily The Iveco Daily Service warning light reset operation is carried out by holding down the accelerator pedal, while the vehicle is completely off: whil…
IVECO Daily (2014-2024 / MK 5) The EDC warning light on the Iveco Daily turns on when the oil level in the tank is no longer sufficient and it is necessary to top it up to avoid fu…

Other guides you may be interested in

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos