Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service warning light on Iveco Daily 35c18

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

In this video we can see how to reset the oil service warning light. On Iveco Daily. First we need to turn on the ignition and see that the red oil warning light is on. At this point we have to turn off the instrument panel; turn it back on and hold the accelerator down for 15 seconds. Once this step has been carried out, keeping the accelerator pedal pressed, we must press the brake pedal ten times. At this point we can remove the instrument panel. Once these steps have been performed, let's turn on the vehicle and check the results. The service light that used to come on must now remain off.

Posted on 12 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Iveco Daily service light
How to reset the Iveco Daily service light
IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we…
How do you reset the Iveco Daily Service light?
How do you reset the Iveco Daily Service light?
IVECO Daily The Iveco Daily Service warning light reset operation is carried out by holding down the accelerator pedal, while the vehicle is completely off: whil…
How to reset the EDC warning light on the Iveco Daily?
How to reset the EDC warning light on the Iveco Daily?
IVECO Daily (2014-2024 / MK 5) The EDC warning light on the Iveco Daily turns on when the oil level in the tank is no longer sufficient and it is necessary to top it up to avoid fu…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos