|
Do it yourself
| |||
| ||||
How to Reset Tyre Pressure on a Volkswagen
Model: Volkswagen Polo
6R, MK V, Polo 5, Polo V, MK 5
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
To reset the tyre pressure on a Volkswagen vehicle, follow the video instructions: first, check the correct pressure found on the label inside the fuel door, where you will find the values for the front and rear axle and for the vehicle loaded or unloaded. Check the pressure with a gauge and adjust it with compressed air if necessary, after removing the valve caps. To reset the TPMS, turn on the ignition, and from the multifunction menu, which can be accessed from the glove compartment (but may also be in the centre console, near the gear lever, or on the dashboard). Press and hold it until you hear a "beep" or see a confirmation on the display. If the light does not turn off, it means there is a leak in one tyre or a faulty sensor.
Posted on 22 March 2026 by ScegliAuto
Related tutorials
Volkswagen Polo
(2017-2025 /
MK 6, Polo 6, AW1, MK VI, Polo VI)
This guide illustrates how to reset the Tyre Pressure Monitoring System (TPMS) warning light on the Volkswagen Polo; before performing the reset, ens…
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
To reset the tyre pressure warning light on your Volkswagen Polo, start by turning on the car without starting the engine. Then, use the buttons on t…
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
Next, we will discover how to reset the tyre pressure warning on the Volkswagen Polo; before resetting the TPMS sensors, ensure all four tyres are at…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
