Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Iveco Daily oil warning light

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Service warning light

The procedure required to manually reset the Iveco Daily (latest version) oil warning light is quite simple and if you follow the instructions in this guide, you will be able to complete it in a few minutes. Go inside the vehicle and make sure it is completely turned off. Then keep the accelerator pedal pressed, insert the key and turn on the ignition. Then press the brake pedal 15 consecutive times and then switch off the ignition. Wait five seconds and then release the accelerator pedal as well. At this point the reset is complete.

Posted on 17 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2024 / MK 5) The procedure outlined in this guide will allow us to reset the service light for the regular maintenance of the engine oil change in the Iveco Daily…
How to reset the Iveco Daily service light
How to reset the Iveco Daily service light
IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we…
How to reset the Iveco Daily oil warning light
How to reset the Iveco Daily oil warning light
IVECO Daily Resetting the Iveco Daily's oil warning light is a very simple operation that can be performed in complete autonomy. With the help of this short vide…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos