Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Iveco Daily service

Model: IVECO Daily
Part: Warning light – error code

To reset the Iveco Daily service, turn on the instrument panel without turning on the vehicle, hold down the accelerator pedal and at the same time fully depress the brake pedal for a few seconds and 10 times (the last time the a few seconds more pressed); pressing the brake pedal 10 times at the same time as the accelerator pedal, we take our foot off the accelerator pedal and we can turn off the instrument panel. Finally we can turn on the instrument panel, turn on the vehicle and notice that the oil light and the message on the display have gone off, so the service is reset.

Posted on 5 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on an Iveco Daily?
How to reset the "Service" light on an Iveco Daily?
IVECO Daily (2014-2024 / MK 5) To reset the "Service" light on an Iveco Daily, start by pressing and holding the accelerator for 10 seconds. Continue holding the accelerator while …
To reset the service light on the Iveco Daily.
To reset the service light on the Iveco Daily.
IVECO Daily (2014-2024 / MK 5) To reset the service light on the Iveco Daily, you can follow these steps: Turn on the Iveco Daily and make sure the service light is displayed on th…
How to reset the service in the Iveco Daily van?
How to reset the service in the Iveco Daily van?
IVECO Daily (2014-2024 / MK 5) In this tutorial we can see how to reset the service in the Iveco Daily van, a very simple and fast operation, to be carried out obviously only after…

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos