|
Do it yourself
| |||
| ||||
Where is the EOBD socket located on the Iveco Daily MK4?
Model: IVECO Daily
MK 4
- Years 2006-2020
In this video we see where to find the EOBD (European On Board Diagnostic) port on the Iveco Daily MK4 version (built from 2006 to 2020). Knowing exactly where the port is located, through which the vehicle can communicate with us and with mechanics, is important for a car, but even more so for a commercial vehicle. In fact, we can also see the problems of our vehicle using an OBD11 reader, which can be easily found on any e-commerce platform, starting from the cheapest ones that cost a few euros, up to the semi-professional ones that exceed 150.00. Although the video shows a vehicle with right-hand drive, the location does not change. It is located behind the grille on the left side of the vehicle: to access it, we will have to unscrew two screws and among the wiring we will find inside the door, we can find our EOBD port.
Posted on 23 April 2024 by ScegliAuto
Video tutorial
Related tutorials
IVECO Daily
(2006-2020 /
MK 4)
In this video, you will see where the EOBD socket is located on the Iveco Daily 3.0. It has a rather unusual placement, as it is found in the passeng…
IVECO Daily
(2006-2020 /
MK 4)
The OBD port on an Iveco Daily vehicle is located inside the cabin; specifically, the port is installed next to the fuse box located behind the drive…
IVECO Daily
(2006-2020 /
MK 4)
The OBD2 socket on an Iveco Daily vehicle is located inside the vehicle's cabin. The position of the OBD2 socket is a bit inconvenient compared to ot…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 1.533
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |