Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the bluetooth of the Iveco Daily

Model: IVECO Daily MK 3 - Years 1999-2006
Part: Car stereo

Activating Bluetooth on an Iveco Daily vehicle is a very simple operation, which will allow you to connect your phone to the vehicle's audio system. To activate it, simply turn on the ignition, turn on the radio, and then press the MODE button in the top right corner. Once you press the button, you can access the menu, continue pressing the same button until the BT MDE option appears. Finally, using the volume knob, select the BT ON option. By doing this, you will have activated Bluetooth, to deactivate it you will need to use the same procedure but select BT OFF.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Connect Your Smartphone to the Bluetooth Radio in the Iveco Daily?
How to Connect Your Smartphone to the Bluetooth Radio in the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To connect your smartphone to the Bluetooth radio in the Iveco Daily, press the MENU button located in the centre of the device. Next, select the "Co…
How to Pair Bluetooth on an Iveco Daily
How to Pair Bluetooth on an Iveco Daily
IVECO Daily In this guide, learn how to pair your smartphone's Bluetooth with the Iveco Daily's radio: from the radio, press "Menu" and scroll to the "BT MODE" f…
How to connect the smartphone to the multimedia system of the Iveco Daily
How to connect the smartphone to the multimedia system of the Iveco Daily
IVECO Daily (2014-2026 / MK 5) In these short and simple steps, we will see how to connect our smartphone to the multimedia system of the Iveco Daily via Bluetooth. First, we get o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos