Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Jaguar XJ key

Model: Jaguar Xj MK 9, X351 - Years 2009-2019
Part: Key

If you want to change the battery in the key of your Jaguar XJ, you must first carefully read the procedure described below and then follow the various steps. First of all, purchase a new CR2032 battery and then remove the key's protective cover and slide out the battery holder from the side. Once you have done this, remove the old exhausted battery and replace it with the new one. Finally, reassemble both the battery holder and the back cover of the key, and the procedure is successfully completed.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery of the Jaguar XJ6
How to replace the key battery of the Jaguar XJ6
Jaguar Xj (1994-1997 / X300, MK 3) If the remote for your Jaguar XJ6 (1994-1997) is no longer working due to a completely dead battery and you want to replace it, follow these steps. F…
How to replace the battery in the Jaguar XJ car remote.
How to replace the battery in the Jaguar XJ car remote.
Jaguar Xj (2009-2019 / MK 9, X351) Today we will see how to change the battery in a smart key remote for the 2011 Jaguar XJ. The remote uses a replacement battery model CR 2032, which …
How to Replace the Battery in a Jaguar XJ?
How to Replace the Battery in a Jaguar XJ?
Jaguar Xj (2003-2007 / X350) To replace the battery in a Jaguar XJ, open the boot to access the luggage compartment. The battery is located under the carpet, which must be lifted…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos