Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service required light on the Jaguar XF

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In today's article, we will see how to restore the service light, that is, the service required light on the Jaguar XF. This procedure is useful in case the light appears on the dashboard even after having had a service done. To restore the light, first press and hold the rear fog light button, keeping it pressed start the ignition without starting the engine, once the ignition is started within 3 seconds release the button, press the button on the side of the turn signal control, and the rear fog light button, wait 10 seconds for the reset procedure to be complete with the buttons pressed.

At the end of the 10 seconds, the message of successful reset will be displayed, at this point release the buttons and restart the ignition.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jaguar XF?
How to Reset the Service Light on a Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) In this tutorial, you will see how to reset the service light on a Jaguar XF, a very simple and quick operation. Before doing this, ensure all requir…
How to reset the service light on a 2012 Jaguar XF
How to reset the service light on a 2012 Jaguar XF
Jaguar Xf (2008-2015 / MK 1) Today we will explain how to reset the service light, related to the car service on a 2012 Jaguar XF model, independently. To reset the light after r…
How to reset the service indicator on a Jaguar XF MK1
How to reset the service indicator on a Jaguar XF MK1
Jaguar Xf (2008-2015 / MK 1) Let's see how to reset the "maintenance required" light on a 2008 Jaguar XF: With the car completely turned off, press and hold the rear fog light sw…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos