Do it yourself
Frequently asked questions about cars and motorcycles

How to Retrieve the Radio Code for a Jaguar?

Model: Jaguar Jaguar Various
Part: Warning light – error code

If you have replaced the battery on your Jaguar or disconnected it for any reason, you will need the radio code to listen to it again. In this brief video, you can clearly see the steps to unlock the radio. After turning on the ignition, once the battery is reconnected, press the sequence of buttons shown in the video. Specifically, you need to hold down: fast forward, the button to store stations (a. Mem), and the button at the end Pty. Once all three are pressed together, you will see the message 'welcome' and can start using the radio again.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jaguar Jaguar Various Today, you will learn how to remove the radio from the Jaguar X in a few simple steps. The first step is to enter the vehicle and sit in the driver's…
Jaguar Jaguar Various Before you can start, sit in the driver's seat of your Jaguar X-Type. Activate the instrument panel by turning the key in the ignition. Next, press a…
Jaguar Jaguar Various The removal of the rear seats of the 1982 Jaguar JX6 is a simple and quick operation to be carried out independently, also thanks to our short video …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos