Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jaguar E-Pace

Model: Jaguar E-Pace MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

To get rid of the maintenance (or service) light that appears on the dashboard display of your Jaguar E-Pace, simply follow the instructions in this guide. First, press the "Start" button and turn on the ignition.

Next, open the driver’s door and press and hold both the brake pedal and the accelerator pedal for about ten seconds. After ten seconds, a new message will appear on the display confirming the completion of the reset.

Release the pedals and finally switch off the ignition. As promised, the entire procedure was quick and simple.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2018 Jaguar E-Pace
How to Reset the Service Light on a 2018 Jaguar E-Pace
Jaguar E-Pace (2017-2024 / MK 1) .. cluster when starting your 2018 Jaguar E-Pace, despite having completed the regular service, don't worry as you can reset it using the following.. …
How to reset the service light of the Jaguar E-Pace
How to reset the service light of the Jaguar E-Pace
Jaguar E-Pace (2017-2024 / MK 1) .. reset of the service light on your Jaguar E-Pace. First of all, get into the car and turn on the instrument panel, then press and hold both the accelerator.. …
How to Reset the Service Light on the Jaguar E-Pace
How to Reset the Service Light on the Jaguar E-Pace
Jaguar E-Pace (2017-2024 / MK 1) .. the instrument cluster display of your Jaguar E-Pace even after the regular service, you need to perform a manual reset of the light. Below are the steps.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos