Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp and LED Fault Check

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

If the LEDs inside the right rear headlamp blink when the lights are turned on, meaning some of them do not light up, you need to replace the headlamp. Open the boot and remove the plastic fasteners of the carpet covering to access the headlamp.

Unscrew the fixing nuts, pull the headlamp from its housing, and reverse the process to install the new one. At this point, you can also dismantle the old headlamp to inspect it and diagnose the fault: you will find damaged LEDs which are fixed on a flat strip.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Checking Fault Memory and Replacing the Fuel Filter
Checking Fault Memory and Replacing the Fuel Filter
Jaguar Xf (2008-2015 / MK 1) If a warning light for engine anomaly related to the fuel supply system appears on the instrument panel, it is advisable to check the fault memory. I…
Replacing the Headlight Bulb on the Jaguar XF
Replacing the Headlight Bulb on the Jaguar XF
Jaguar Xf (2008-2015 / MK 1) The following steps will show you how to remove and replace the headlight bulb on the Jaguar XF, following the instructions below. First, open the en…
How to Replace the Front Headlight Bulb on Jaguar XF
How to Replace the Front Headlight Bulb on Jaguar XF
Jaguar Xf (2008-2015 / MK 1) In this video, we'll show you how to remove and replace the front headlight bulb on a Jaguar XF from 2009 to 2013 in simple steps. First, open and li…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos