Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. Xf
    4. : How to replace a headlight bulb on Jaguar XF

Jaguar Xf - Video tutorial

Model: Jaguar Xf MK 1 - Years 2008-2015
Part: Headlight bulb
Operation: How to replace a headlight bulb on Jaguar XF

In this video we will see how to remove and replace the headlight bulb on a Jaguar XF from 2009 to 2013, in simple steps. First we open and lift the bonnet of our car and we go to remove the front light; to do this we unscrew the headlight screw that we find on the wheel arch and the fixing screws that we find on the headlight, as shown in the video. At this point we disconnect the electrical connector of the bulbs and remove the plastic protection cap of the dipped beam bulb; then disconnect the connector of the same and replace the bulb with the new one, of the right type!


Posted on 18 January 2024 by ScegliAuto



Replacement of the front headlight bulb of the Jaguar XF.
Jaguar Xf (2008-2015 / MK 1) The following steps will show us how to disassemble and replace the headlight bulb of the Jaguar XF, following the instructions below. First, we open
How to replace the ceiling light bulbs on Jaguar Xf
Jaguar Xf (2008-2015 / MK 1) Does the ceiling light bulb on the Jaguar Xf need to be replaced? No problem, let's see how the ceiling light is removed. We pry between the ceiling
How to reset the service in the Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) In this tutorial, we can see how to reset the service in the Jaguar XF, a very simple and fast operation. Before doing this, we must have completed a

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos