Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a Jeep Grand Cherokee, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that all scheduled maintenance tasks have been completed.

Start by entering the cabin, then insert the key and turn on the ignition, but not the engine. Next, fully press the accelerator pedal three times in quick succession, turn off the ignition, turn it back on, and check that the reset has been successful.

If not, repeat the process, ensuring it is completed within 10 seconds.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How do you reset the Service light on the Jeep Grand Cherokee?
How do you reset the Service light on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) It will be possible to completely remove the Service light from the instrument panel of the Jeep Grand Cherokee by turning on the instrument panel af…
How to reset the service in the Jeep Grand Cherokee?
How to reset the service in the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, we can see how to reset the service in the Jeep Grand Cherokee, an extremely simple and quick operation, to be done only once all s…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos