Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Jeep Compass?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Jeep Compass, start by turning on the instrument cluster without starting the engine. Use the buttons on the steering wheel to access the onboard computer menu.

Generally, the "Menu" button will allow you to navigate through the various sections available on the display. Once inside the menu, use the arrow buttons to find the option related to maintenance or service intervals.

When you reach the correct section, select the option to reset the maintenance interval. At this point, the system will ask you to confirm your choice.

Press the confirm button and hold it until the system confirms the operation is complete. The "Service" light will automatically turn off, indicating that the maintenance interval has been reset.

Once finished, turn off and then on the instrument cluster to check that the light does not come back on. If it does, repeat the procedure, ensuring that you follow each step carefully.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Jeep Compass (2016-2025 / 552, MK 2) Hello! Today, focus on resetting the "Service" light on your Jeep Compass. Before starting, ensure that you have performed the service as recommended…
Jeep Compass (2016-2025 / 552, MK 2) It will be possible to completely remove the Service light from the instrument panel of the Jeep Compass by inserting the ignition key, turning it to…
Jeep Compass (2016-2025 / 552, MK 2) Before starting, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster. Within the first ten seconds of turning o…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos