Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Jeep Compass?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we can see how to reset the service in the Jeep Compass, an extremely simple and quick operation to be carried out only after completing all the scheduled maintenance work. Let's start by going inside the cabin, then insert the key and turn on the instrument panel, not the engine.

Then press the accelerator pedal all the way down three times in a row, turn off the instrument panel, turn it back on, and verify that the reset was successful. If not, repeat the procedure, making sure to complete it within ten seconds.


Posted on 21 May 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a Jeep Compass, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once conne…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To reset the Service light on a Jeep Compass, turn on the ignition without starting the engine. Press and hold the accelerator pedal. At the same tim…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos