Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Patriot?

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Service warning light

To reset the Service light that appears on the instrument panel of the Jeep Patriot, you need to turn on the instrument panel without starting the engine by turning the key in the ignition switch. Once the instrument panel is turned on, you can press the accelerator pedal three times all the way down and then hold down the brake pedal. At this point, you can wait for about ten seconds with the brake pedal depressed until the light disappears; at the end of the procedure, you can turn off the instrument panel.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Jeep Patriot
How to reset the service light on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) When the wrench light comes on a Jeep Patriot vehicle, it means that it is necessary to reset the service reminder light. To reset the light, we need…
How to reset the service light on the Jeep Patriot
How to reset the service light on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) The reset of the service light on a 2016 Jeep Patriot vehicle follows simple steps that can be done independently. The steps to be performed are 3 an…
How to reset the service light on a 2014 Jeep Patriot
How to reset the service light on a 2014 Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today we will reset the service light, related to the engine oil change and maintenance, of the 2014 Jeep Patriot model. We turn on the instrument pa…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos