Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Jeep Avenger?

Model: Jeep Avenger MK 1 - Years 2022-2026
Part: Service warning light

To reset the "Service" light on a Jeep Avenger, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to navigate through the menu on the central display, looking for the section dedicated to vehicle maintenance or service. Once found, enter this section and select the maintenance reset option. The system may ask you to confirm the operation: accept the request to start the reset of the "Service" light. Complete the procedure and verify that the light is actually turned off by turning off and turning on the instrument panel. The light should remain off, confirming that the reset has been performed correctly and that the maintenance reminder has been reset.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the service light in the Jeep Avenger?
How do you reset the service light in the Jeep Avenger?
Jeep Avenger (2022-2026 / MK 1) Short video tutorial, available here, useful to understand the procedure for resetting the service light on the Jeep Avenger. The tasks to be perform…
How to reset the tire pressure light in the Jeep Avenger?
How to reset the tire pressure light in the Jeep Avenger?
Jeep Avenger (2022-2026 / MK 1) In this tutorial, we can see how to reset the tire pressure warning light in the Jeep Avenger, an extremely simple and quick operation, to be carried…
How do you reset the tire pressure light on the Jeep Avenger?
How do you reset the tire pressure light on the Jeep Avenger?
Jeep Avenger (2022-2026 / MK 1) To reset the tire pressure warning light of the Jeep Avenger, you need to inflate the tires until they reach the recommended pressure value: this pre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos