Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In this tutorial we can see how to reset the service in the Jeep Wrangler, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. Let's start by going inside the cabin, then insert the key and turn on the instrument panel, not the engine.

Then press the accelerator pedal all the way down three times in a row, turn off the instrument panel, turn it back on and verify that the operation was successful. If not, repeat the procedure, making sure to complete it within 10 seconds.


Posted on 18 July 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Jeep Wrangler?
How do you reset the Service light on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) The procedure for resetting the Service light that appears on the instrument panel of the Jeep Wrangler can be done by inserting the ignition key int…
How to reset the tire pressure sensor on the Jeep Wrangler
How to reset the tire pressure sensor on the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Below we will discover how to reset the tire pressure light on the Jeep Wrangler; before resetting the TPMS sensors, it is necessary that all four ti…
How to reset the service in the Jeep Wrangler?
How to reset the service in the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service in the Jeep Wrangler, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must ha…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos