Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil light on a 2016 Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Today we will see how to reset the maintenance and engine oil change light on a 2016 Jeep Compass vehicle. Turn on the instrument panel of our vehicle without starting the engine and press on the brake pedal and accelerator pedal at the same time.

While keeping the brake pedal pressed, release and press the accelerator pedal three times in a row. Then turn off the instrument panel and wait 10 seconds before turning on the instrument panel and completing the reset procedure for the light. If the light is not reset, it will be necessary to wait an hour and repeat the operation.


Posted on 21 October 2025 by ScegliAuto


Related tutorials

Jeep Compass (2006-2016 / MK 49, MK 1) Our video tutorials explain how to act independently in the face of a problem with your vehicles. Today's video is about resetting the oil light on a…
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
Jeep Compass (2016-2025 / 552, MK 2) Today we will see how to perform the reset operations on a 2019 Jeep Compass. To reset the service light, you need to: - turn on the ignition; - pres…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos