Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the service reset on the Jeep Grand Cherokee.

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

On your Jeep Grand Cherokee, the maintenance/oil interval reset, also known as the service reset, is performed using the onboard controls. With the vehicle stationary, turn the ignition to ON without starting the engine; access the vehicle menu visible in the images and navigate to the Maintenance/Service section. Select the reset option for oil or service and confirm the request by following the order of commands shown (using the steering wheel buttons or selection on the central display, depending on the trim). Once completed, return to the Service screen to check the update of the counter and the absence of the warning. If the procedure is not accepted, repeat the sequence ensuring that the ignition is set to ON.

Posted on 14 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
How to reset the oil service on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this tutorial we can see how to reset the oil service in the Jeep Grand Cherokee, an extremely simple and quick operation, to be carried out only …
How to reset the service on the Jeep Grand Cherokee?
How to reset the service on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / MK 5, WL) In this tutorial, we will see how to reset the service on the Jeep Grand Cherokee, a very simple and quick operation that should be done only after c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos