Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Jeep Patriot

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

Video tutorial

In this video, we can see how to reset the service light on the Jeep Patriot: as with almost all vehicles, when we perform this operation, we need to make sure that the doors, the front hood, and the rear trunk are securely closed. Turn on the instrument panel and slowly press the accelerator pedal all the way down three times.

Turn off the ignition. Wait a few seconds and then turn the ignition back on and start the engine.

We see that the service light has disappeared. If you can't make it go away on the first attempt, repeat the operation, remembering that the pressure on the pedal should be slow and deep.


Posted on 13 January 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Patriot
How to reset the service light on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) When the wrench light comes on a Jeep Patriot vehicle, it means that it is necessary to reset the service reminder light. To reset the light, we need…
How do you reset the Service light on the Jeep Patriot?
How do you reset the Service light on the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) To reset the Service light that appears on the instrument panel of the Jeep Patriot, you need to turn on the instrument panel without starting the en…
How do you reset the Service light on the Jeep Patriot?
How do you reset the Service light on the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) It is possible to make the Service light on the instrument panel of the Jeep Patriot disappear completely by inserting the ignition key into the igni…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos