Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Key Battery of a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

Video tutorial

Learn how to change the battery of the remote key for a Jeep Renegade. Take your remote key and use a screwdriver to pry at the side of the key cover until the cap covering the battery separates.

Remove the worn battery with a small screwdriver and take a new one of the same size and type; replace it. Refit the cover on your remote: press on the key case until you hear the locking click (cap of the cover). Check the correct functioning of the key with the designated buttons (door opening and closing).


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…
Replacing the Remote Battery on a Jeep Renegade
Replacing the Remote Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Is the remote key for the Jeep Renegade not working anymore? Let's try replacing the battery. Take your ignition key, pull out the metal key, and use…
How to Replace the Remote Battery on a Jeep Renegade
How to Replace the Remote Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today's video, you will see the instructions for disassembling and replacing the battery of the key remote on a Jeep Renegade, in simple steps. Fi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos