Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light on a Jeep Wrangler, a very simple and quick operation, to be performed only after completing all scheduled maintenance tasks. First, enter the cabin, then insert the key and turn on the instrument panel, not the engine.

Fully press the accelerator pedal three times in quick succession, turn off the ignition, turn it on again and check that the procedure has been successful. If not, repeat it ensuring to complete it within ten seconds.


Posted on 7 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a Jeep Wrangler?
How to Reset the Service on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will see how to reset the service on a Jeep Wrangler, a very simple and quick operation to perform only after completing all sc…
How to Reset the Oil Service Light on a Jeep Wrangler?
How to Reset the Oil Service Light on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial, you will see how to reset the oil service light on a Jeep Wrangler. This operation is very simple and quick, to be performed only a…
How to Reset the Oil Service Light on the Jeep Wrangler?
How to Reset the Oil Service Light on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial, you will see how to reset the oil service light on the Jeep Wrangler, a very simple and quick operation. Before proceeding, ensure …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos