Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

In this tutorial, you will see how to reset the oil service light on a Jeep Wrangler. This operation is very simple and quick, to be performed only after completing all required maintenance tasks. First, insert the key and turn on the ignition. Then, press the accelerator pedal fully four times in a row. Turn off the ignition, turn it back on, and check that the procedure has been successful. If not, repeat the operation, ensuring to start pressing the pedal within a few seconds of turning on the ignition.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Service on the Jeep Wrangler?
How to Reset the Oil Change Service on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) Resetting the oil change service on the Jeep Wrangler is very simple; let's see how to proceed in this tutorial. This procedure should only be follow…
How to reset the oil light on the 2025 Jeep Wrangler
How to reset the oil light on the 2025 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
How to reset the oil service on the Jeep Wrangler?
How to reset the oil service on the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial we can see how to reset the oil service in the Jeep Wrangler, an extremely simple and quick operation, to be carried out only once t…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos