Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads and Discs on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Brake rotors

To replace the front brake discs and pads, start by lifting the vehicle and removing the front wheel. Since the discs need replacing, you can remove the caliper along with its bracket. Remove the screw that secures the disc to the hub bracket, then take off the old disc after applying some penetrating spray. It is recommended to brush and apply grease to the disc seat before installing the new one, securing it with the new screw provided. Replace the pads and the corresponding sliding plates in the caliper, and before reassembling everything, clean the disc with a suitable cleaner to remove protective oil.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads and Discs on the Jeep Renegade
Replacing the Rear Brake Pads and Discs on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, see how to replace the rear brake discs and pads on the Jeep Renegade. First, lift the vehicle and start by removing the rear…
How to Change the Brake Pads on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Remove the front brake pads from a Jeep Renegade. Lift the vehicle using a jack; raise it to a comfortable height for working. Unscrew the bolts with…
How to Replace the Front Brake Pads on a Jeep Renegade 1.6 Diesel 120 hp?
How to Replace the Front Brake Pads on a Jeep Renegade 1.6 Diesel 120 hp?
Jeep Renegade (2014-2026 / 520, MK 1, BU) If you need to remove and replace the front brake pads on your Jeep Renegade 1.6 diesel 120 hp, just watch this video tutorial and carefully follow a…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos