Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads and Discs on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Brake pads

Video tutorial

In this video tutorial, see how to replace the rear brake discs and pads on the Jeep Renegade. First, lift the vehicle and start by removing the rear wheel; then, use a socket spanner to undo the bolts of the brake caliper to remove it, as shown in the video.

At this point, leverage the caliper piston to extract the old pads, replacing them with new ones; undo the bolts of the disc to replace it as well. Insert the pads into the caliper and reassemble everything!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads and Discs on Jeep Renegade
Replacing Front Brake Pads and Discs on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the front brake discs and pads, start by lifting the vehicle and removing the front wheel. Since the discs need replacing, you can remove …
How to put the electronic handbrake of the Jeep Renegade into maintenance mode
How to put the electronic handbrake of the Jeep Renegade into maintenance mode
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, we will see how to put the electronic handbrake of the Jeep Renegade in maintenance mode, so that we can change the rear brake pads. W…
How to Disable the Electric Handbrake on a Jeep Renegade
How to Disable the Electric Handbrake on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, we can see how to disable the electric handbrake on the Jeep Renegade. Essentially, we will put it into "maintenance" mode so that we …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos