Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Jeep Renegade 1.6 Diesel 120 hp?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Brake pads

If you need to remove and replace the front brake pads on your Jeep Renegade 1.6 diesel 120 hp, just watch this video tutorial and carefully follow all the illustrated steps. First, to remove and replace the brake pads, you will need to lift the vehicle using a jack and remove the affected wheels (in this case, the front ones). Once this is done, you are ready to proceed: undo the bolts securing the brake housing, slide out the old pads, and insert the new ones, ensuring they are properly aligned with the nuts. Now, you can reassemble everything and check the operation of your brakes.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Remove the front brake pads from a Jeep Renegade. Lift the vehicle using a jack; raise it to a comfortable height for working. Unscrew the bolts with…
Replacing the Rear Brake Pads and Discs on the Jeep Renegade
Replacing the Rear Brake Pads and Discs on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, see how to replace the rear brake discs and pads on the Jeep Renegade. First, lift the vehicle and start by removing the rear…
Replacing Front Brake Pads and Discs on Jeep Renegade
Replacing Front Brake Pads and Discs on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the front brake discs and pads, start by lifting the vehicle and removing the front wheel. Since the discs need replacing, you can remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos