Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Service warning light

How to reset the service light? You are in the right place; below are practical tips to clear the warning on the dashboard. Sit in the driver's seat and close all the doors of the vehicle. Turn on the ignition without starting the engine; if you have a start/stop system, press the button twice without touching the brake pedal. Ensure that the oil change light is illuminated. Within ten seconds, press the accelerator pedal slowly to its maximum travel. Now you can turn off the ignition and wait five seconds before starting the Jeep. Check that the indicator has been reset.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to reset the oil change on the 2021 Jeep Compass
How to reset the oil change on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In the following article, we will see how to reset the oil change indicator light on the 2021 Jeep Compass. This operation will take less than 1 minu…
How to Reset the Oil Change Warning Light on the Jeep Compass
How to Reset the Oil Change Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, follow the necessary steps to reset the service warning light for the oil change on the Jeep Compass. First, get inside the vehicle…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos